Expert Answers about Clevis Hitch
- What Clevis Adapter Works with the B&W Tow & Stow Pintle Hook # BWTS20055?
- Yes! For the correct Clevis hook adapter for the B&W Tow & Stow Pintle Hook with 2" Ball - 2-1/2" Hitches # BWTS20055, that is the Clevis Adapter for B&W Tow & Stow 2-1/2" Ball Mounts # BWTS35200B. Like the Tow & Stow, the adapter is 100% made in the U.S.A.
view full answer... - Clevis Hitch and Pin to Tow an Agricultural Trailer
- It sounds like you're looking for a clevis hitch, like the MaxxTow # MT70034. Then use a 1 inch diameter clevis pin, part # CP20, to hook up your trailer.
view full answer... - Safety Chain Hook Replacement with a Larger Clevis Hook for a Class V Trailer Hitch
- I have a clevis hook that may work with your 5,000 lb trailer. Take a look at part # 6495-401-04. This hook has a working load limit up to 5,400 lbs and the pin that connects through the chain is 7/16 of an inch in diameter.
We have heavy-duty clevis hooks, but they have significantly higher weight capacities than you will need for your 10,000 lb trailer. The Curt Clevis Hook, # C81970, has a 40,000 lb weight capacity and the pin that connects through the chain is just over half of an...
view full answer... - Do You Have Something Like a Lockable Hitch Pin that is 3/8 Inch Diameter?
- The closest solution we have is the Replacement Clevis Pin # 3371302328 along with the Master Lock Combination Padlock # ML4680DNKL to fit into the pinhole of the pin. Since the pinhole of the clevis pin and the padlock shackle is 1/8 diameter, it will serve its purpose.
With that being said, we do not carry a standard 3/8 inch diameter lockable hitch pin.
view full answer... - Which Clevis Adapter Will Fit on the B&W Tow & Stow
- It sounds like you're looking for the Clevis Adapter for B&W Tow & Stow 2" Ball Mounts - 10,000 lbs # BWTS35100B, which is compatible with the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Black # BWTS10037B you were looking at. This would give you both a drawbar style attachment and the double ball setup that you're looking for.
I've linked some review videos of these parts for you to have a look at.
view full answer... - Trailer Hitch-Ball Mount-Ball and Safety Chain for Towing a Camper Trailer w/ a 2001 Tacoma
- The replacement safety chain you will need depends on the weight of your camper trailer. The 48 inch long safety chain, # 2114-553-04, would be a good choice as long as the loaded gross weight of your trailer does not exceed 6,000 lbs. and you use the safety chain as 2 chains. If the clevis style hooks will not work on your vehicle, that S-hooks on the safety chains mentioned should work well. If you are worried about the chains coming loose, you could use a quick link, # 6590-044-04,...
view full answer... - Recommended Locking Pins for a Shackle Hitch
- You will need two separate types of locking pins to secure both the shackle to the mount and the BulletProof Hitches Shackle Hitch for 2" Receivers item # ED20SHACKLE to your truck. I recommend the InfiniteRule Locking Pin for Swivel Hooks or Shackles - 3" Span - Stainless Steel item # 340065000. This will lock your shackle so you don't have to worry about someone pulling the pin and taking your trailer.
To secure your ball mount to your truck you will want the etrailer Hitch Receiver...
view full answer... - Recommended Safety Chain Cables For A 2022 Ford F-250 With A BW Hitch
- When it comes to using safety chains on your 2022 Ford F-250 with a BW hitch The 40 inch Vinyl Coated Safety Cables with Clevis Hook (Qty. 2) by Dutton-Lainson, 6,500 pounds # DL20119 are confirmed to fit per the manufacturer.
This kit includes a pair of 5/16 inch vinyl-coated cables with safety hooks at one end. These cables are to be used on trailers up to 6,500 pounds, the coil tension eliminates dragging and rattles. The cables extend up to 40 inches when straightened.
I attached...
view full answer... - Hitch, Drawbar, Hitch Ball, and Safety Chains Needed to Tow a Trailer
- For your 2001 Kia Sportage, in addition to hitch, and wiring # HM43915, you will need a ball mount and a ball for the coupler on the trailer. You will also need safety chains unless the trailer comes with them.
For a 1-1/4 inch by 1-1/4 inch opening, like your Draw-Tite Trailer Hitch, use Class II Drawbar, # 36051. With this ball mount, use Hitch Ball, # 19256. To secure and lock the drawbar in place, use the Trailer Hitch Receiver Lock, # e98879.
For safety chains, I would go with a...
view full answer... - Parts Needed For Yard Ramp Build
- Making a custom ramp like this takes some unusual parts, but I think I can help. For the wheels, I recommend the Ultra-Fab Hitch Mounted Skid Wheels for RVs up to 30' Long - 4" Diameter - Qty 2 # UF48-979015.
For the 2 speed manual crank jack, I recommend the Square 2-Speed Jack - Drop Leg w/ Spring Return - Sidewind - 12-3/8" Travel - 10K # TJD2SP-12000SP-F.
I don't know what you mean by tow boot. I assume you want a combo bar like # E-9 or a receiver like # UF35-946401.
For safety...
view full answer... - Recommended Solution for Adding Gooseneck Hitch to 2001 Ford F-550 Cab and Chassis
- I have a solution for you, but there is not a custom fit gooseneck available for the 2001 Ford F-550 cab and chassis, so anything you choose will need to be custom fabricated and installed by a certified welder. I'll also say that I don't know how a fiberglass truck bed is going to hold up for this type of application, so you will want to be careful that nothing is attached to the truck bed so that you can avoid damaging it.
That said, you could likely use the Curt Gooseneck Flat Plate...
view full answer... - Parts Needed to Flat Tow 1986 Chevy G30 Van
- To flat tow your 1986 Chevy G30 van you are going to need a number of parts, starting with a base plate and tow bar. Since there are no vehicle-specific base plates for your van I recommend checking out the Curt Tow Bar with Adjustable-Width Arms # C19745.
This comes with clevis mounts that need to be bolted on the van, and will require you have or fabricate a flat area on the frame, as you can see by the accompanying cut out of the linked directions. Also note that this tow bar and mount...
view full answer...
Go To Results